What's this? Based on speed, power, run and charge times, handling, and noise. The displayed score is out of a total of 100 points.
Approximate retail price:
$79.99
Summary:This 19.2-volt Craftsman in the light use drill/drivers category has a 3/8-inch chuck and one speed range with 24 clutch settings. It is sold with 2 NiCd batteries. It has a 1 year warranty.
Power: Denotes the twisting force for tightening and loosening.
Run time: Reflects how much work the drill can perform per battery charge, as measured on a dynamometer.
Handling: Denotes the ease of handling and controling the drill during operation.
Noise: The dBa level at ear level, indicating whether or not ear protection should be used during prolonged operation.
About This Brand
Craftsman is one of the leading brands of cordless drills. Craftsman cordless drills are geared to the consumer market and are available in multiple sizes, weights, and voltages. Craftsman cordless drills are available in NiCd and Li-Ion battery types. Craftsman drill drivers are sold at Sears and Kmart and online at Sears.com.
Features & Specs - Craftsman 17191
Battery type The type of batteries provided with the drill. All are rechargeable. The more common type is denoted NiCd, for its nickel-cadmium components. Nickel-metal hydride (NiMH) batteries boast added energy for their weight. Lithium-ion (Li-Ion) batteries are the latest type and deliver even more power in a smaller size. Lithium-ion and NiMH batteries can be disposed of with regular refuse; NiCd must be recycled.
Battery type
NiCd
Battery recharge time (min.) How long it takes to completely recharge a battery after it has properly cooled down. Most of the fast chargers have a built-in temperature sensor that delays the charging cycle, when the battery is too hot from recent heavy use, to when the battery has cooled.
Battery recharge time (min.)
60
Speed ranges Many cordless drills have two separate speed ranges, or gear ratios; some newer models have three. The slower speed range peaks at about 400 revolutions per minute (rpm) and provides increased torque (twisting force) for driving large screws. A higher speed range that reaches about 1,500 rpm or more is well suited for rapid drilling. Lower-priced drills usually have a single speed range that tops out at approximately 600 to 800 rpm, compromising both driving and drilling performance.
Second purchase of this model with both rendered useless as chuck has locked up.
How long have you owned it:
More than six months
Bottom Line
No, I would not recommend this to a friend.
By Texas Joe
from Fort Hood, TX
4.0
Good power; Battery life lagging
10/27/2011
Pros
Easy To Use
Powerful
Cons
Heavy
Short Battery Life
Best Uses
In The Workshop
Comment:
Without a doubt, the 19.2 volt Craftsman drill has plenty of power, but when the battery is left in the drill or any accessory for longer than a couple of weeks, the battery will need a charge before you use the device again. It's heavy to boot and weighs almost twice as much as the old 14 volt cordless drill.