PRINTING. The HP LaserJet Pro MFP M130fw prints using laser technology, which picks up powdered 'toner' on a roller and fuses it to the paper with heat. It prints black-and-white text with Excellent quality, as we've come to expect from a laser printer. Text printing speed is typical, about 11.5 pages per minute, costing 4.7 cents per page. It prints black-and-white graphics with some obvious defects, but OK for casual use, at 6 pages per minute, costing 11.9 cents per page. The capacity of the main paper tray is 150 sheets, a typical size.
SCANNING and COPYING. Scanning performance was Good, but had a few noticeable flaws. It can scan or copy an area up to 11.7 x 8.4 inches (letter size). Copying performance was Good, but had a few noticeable flaws. It has an Automatic Document Feeder (ADF) for easily scanning/copying a stack of pages.
CONTROLS and DISPLAY. The printer has a 3.4-inch (diagonal size) color display screen and a touchscreen.
CONNECTIVITY and NETWORKING. You can connect directly to a PC with a USB cable, or to your network router either wirelessly with WiFi or with an Ethernet cable. Apple AirPrint is built in, to print wirelessly from Apple devices via your local network. You can also install an app on your smartphone or tablet, as another option for printing over your WiFi network. You can also print an email remotely by forwarding it directly to this printer. This model has built-in faxing, can store incoming faxes if the paper runs out, and can send faxes from an attached PC.
COST OF OWNERSHIP AND TONER. When this section was last updated, the printer's purchase price was about $200, typical for an all-in-one black and white laser printer. Printing uses up toner. Over time, as you print, the costs add up. This printer uses one cartridge. The HP toner cartridge used in testing was the 17A. At the time, its price was $66. We estimate the toner cartridge to last a very long time — 4 years — following a typical printing schedule. After 2 years of typical use, we estimate the total equivalent cost to be $237, typical for a mono laser. The estimated yearly cost is $19, high for this printer type. So the 3-, 4- and 5-year estimates are $256, $275 and $294 respectively.
NOTE. This printer was noisier than most while printing, so you might want to locate it away from sleeping areas.
PRINTER FIRMWARE. Firmware is software that exists inside the printer. All models are evaluated using the latest firmware version available at the time of testing. The firmware version of the HP LaserJet Pro MFP M130fw was 20160526.
SOFTWARE. The collection of software accompanying the printer may include: the printer driver, printer applications, electronic user manual, (and for all-in-ones:) scanning, faxing, and OCR apps. These get installed on your personal computer. All models are evaluated with a Windows 10 PC using the latest version of printer driver and printer support apps available at the time of testing. The software version was 20.79.1.6223.
ABOUT THE TONER CARTRIDGE, SOFTWARE AND FIRMWARE. Our test results are valid only for the HP-brand toner cartridge, and the software and firmware versions indicated. If your printer's software or firmware differ from the ones shown you either have an older or a newer version of these. Manufacturers may periodically upgrade the printer's firmware to enhance operation, fix bugs, or add features. Firmware updates are downloadable directly to your printer via a wired or wireless network (if internet capable). You can check your printer's firmware version, or upgrade to the latest firmware by either (1) running the HP printer-update app installed on the PC, or (2) accessing the "Settings" section of the printer menu and navigating to the firmware update option. Consult the user manual or HP's website for further guidance. Try searching online.
